Tire Safety: How Old Is Too Old?
When thinking about tire safety, it is important to consider two things: age and use. Vehicles driven daily are typically driven 15,000 miles a year. But there are situations where cars put on even fewer miles. This includes: being driven only on the weekends, never driving in the rain, show cars, and cars that are stored for extended periods of time. So, some tires on these types of cars put on less than 100,000. But it doesn t mean that they are safe tires. Tires deteriorate over time and can age out wear out before they wear out. In a statement from the British Rubber Manufacturers Association (BRMA) issued on June 5, 2001 regarding the age of tires they state, “BRMA members strongly recommend that unused tires should not be put into service if they are over 6 years old and that all tires should be replaced 10 years from the date of their manufacture.” Tire age can be accelerated by a variety of environmental factors, such as sunlight exposure and coastal climates. Poor storage and infrequent use of your vehicle are other things that can accelerate tire age. If you keep your tires in ideal conditions, the tire age can go as high as 10 years from its manufacture date. But ideal conditions are the exception rather than the rule. And the worst part is that you cannot tell the safety of an old tire just by looking at it since there are no conclusive tests for the safety of tires without destroying the tire itself! Due to this, some European car manufacturers of high performance sports cars, coupes and sedans have hedged their bets, stating in their owners manuals that the tire age should reach no higher than 6 years. How Better Rubber Makes Tires That Are Safe There have been a lot of changes in rubber compounds since Charles Goodyear discovered how to cure rubber when he baked a combination of natural rubber and sulfur on his family s kitchen stove. Thus, he would convert an unappreciated raw material into many useful products. Goodyear cross-linked sulfur with polymers that, when exposed to heat, would help make rubber durable and at the same time maintain its elasticity. The main focus of new research has been finding tire age inhibitors. Sulfur molecules are one such tire age inhibitor that is reactivated every time they are exposed to heat, making the rubber harder. Nowadays, rubber in tires has oil in it that tends to migrate into the tires under tread/casing and evaporate into the air. In the process of this, the tire compound releases oil and gets harder. If you can t quite visualize this, go into any tire store and take a big whiff. You ll smell the oil there. Before curing, most tires are coated with a mold release agent that is makes it easier to remove from their mold after curing. If it s a little hard to visualize, think about spraying Pam on a fry pan before pouring on the batter for pancakes. This increases the safety of tires because some of the mold release agent gets cooked onto the surface of the cured tire, which prevents all the oil from evaporating. What Is The Right Tire Age? In most cases, most street tires are good for 6-8 years if maintained properly. Don t forget though that this includes the time the tires spent from the manufacturer s plant to the dealer to you. So, keep this in mind when you are determining tire age. Most tires get to you anywhere between 3-6 months. Some stay longer with the tire manufacturer, but generally all tires that go on your car are less than a year old. So, you should not get an old tire from any tire manufacturer. Which Tires Last Longest? If you want to buy a tire based on how long it will last, you have to consider thread compound. The more aggressive its compound the shorter tire life. Below is a list of tires from longest-lasting to shortest-lasting: Max Performance Ultra High Performance tires DOT-legal competition tires Bottom line: if you want to avoid safe tire issues go with tires that last long and properly maintain them.Bob Martin says Don t buy any new tires until you take a serious look at this today http://www.discount-tires-online.com/TireRatings/tire-rating-guide.htm This article is a copyrighted work and does not come with reprint or resale rights and may not be altered or changed in any way including the resource box. The site owner acknowledges that by using this article they accept this condition. The only exception being to bold the appropriate copy i.e. headlines and subhead text.
Source: www.ArticlePros.com
First Time buyers, bad credit auto loans, bad credit car loans,no credit car laons
How to get approved when you have no credit.They teach a lot of things in schools but one thing they don t teach is how to get a loan when you don t have any credit. So picture this you 18 years old you just graduated from high school and you need to get a car so you get to collage and your job what do you do. Well you might think do I get a cosigner? Do I buy car cash? Do I go to every dealer in town to try to get a car loan? Well you if you have a cosigner then go ahead and use them, but if you don t what do you do? You need to go and pay cash or hope you don t get declined by every car dealer in town. You can do this be smart about starting you credit and make a plan before you run out their and make a mistake and get a car you can t afford on a interest rate that is to high and end up not be able to pay for it. If you want the best chance of getting approved you what to make sure you have got a job and have been on that job for at least 1 year. If you have been on your job for less than 1 year you are going to need a previous form of employment and preferable in the same field.Once you have figured out that a job is important to getting loans prepare yourself to prove your income. We you get ready to prove your income you need to have a computerized pay stub and maybe even a W-2 form from your previous one to two years income if you have been on your job that long. If you don t have a computerized pay stub then you need to get copies of you cancelled checks from payroll and or letter from your employer stating your start date on your job, position, and pay rate. Once you got the proof of income taken care of you need to make sure you have some money down. The more money that you have down the better chance you have of getting approved for a loan and also the lower payment you will have. When a bank lends to a first time buyer or a consumer with no credit they like to see some sort of investment on the consumer behalf. The banks feel that if a consumer is buying the car with no credit is willing to invest some of their hard earned money in the car that they apply for a loan for then they will be more like to pay for that car.Once you have got the down payment taken care of then you need to be reasonable about what type of car you are going to buy. This means a car around ten thousand dollars. Make sure the payment is around 15% percent of you gross monthly income. You may be able to get a little bit more expensive new vehicle through a first time buyer program with manufacture. One manufacturer that has a first time buyer program is Ford. If you need a reputable company to put you in touch with a dealer that can get you approved on a first time buyer program check out http://www.shotcredit.com.Best of luck getting your new or used vehicle hopefully you take you no credit to good credit instead of bad credit. Paul Armstrong is finance professional with 10 plus years of experience in auto industry. During his time in the auto industry Paul has focused on helping customers with bad credit obtain auto loans when no one else was able to. Focusing on the sub prime auto market has been a 10 year pursuit to educate himself in the intricacies of how to get customers approved with recent bankruptcies, prior auto repossessions and overall horrible credit.
Source: www.ArticlePros.com
The scoop on carbon fiber hoods
Carbon Fiber seems to be the material of choice for aftermarket accessories. Now you can find carbon fiber mirrors, dash trim kits, hoods, fenders, and who knows what else. So what is the big deal with carbon fiber?Carbon Fiber seems to be the material of choice for aftermarket accessories. Now you can find carbon fiber mirrors, dash trim kits, hoods, fenders, and who knows what else. So what is the big deal with carbon fiber?There are a few reasons that carbon fiber has taken off in the past few years. It is a lightweight, rigid, visually appealing material. It has a unique textured look and a smooth finish. It is surprisingly strong, and doesn’t flex much.Take carbon fiber hoods for example. A lot of tuners like to add a carbon fiber hood on their cars. Opposed to the steel factory hoods, these carbon fiber hoods can reduce the weight of the vehicle by as much as 40 or 50 pounds on some applications. This modification, when added to other weight reducing modifications, can slightly decrease 0-60 times and marginally improves handling and acceleration.The other reason is the cool textured looking finish. Add a few carbon fiber touches as a theme throughout the vehicle and this can score some major style points.These carbon fiber hoods are fairly expensive for their weight reducing capabilities, but add a lot of style for the money. Browse through our website to find a carbon fiber hood for your car at www.majesticmodifications.com. Once you have purchased the hood you want, it’s time to get it installed. You may need a hand removing the factory hood due to its weight, but once it is removed, you should be able to handle the much lighter carbon fiber hood. The installation is fairly easy, so here is a quick guide to help you get it installed.Start your installation by removing the windshield washer jets for the factory hood. Disconnect the tubing that runs to them by unclipping or unscrewing them. If there is a light attached to the hood, go ahead and remove it, as you may want to reuse it on the new hood.With these removed, and with some help on the other side, prop the hood up with the hood prop if applicable. Remove the 4 bolts holding the hood to the hinges. If your hood has gas shocks, remove them before removing the hinge bolts. Be careful to support the weight of the hood when removing the hinge bolts to reduce the risk of damaging the fenders or the windshield. With the hinges and gas shocks unbolted, this will free up the heavy factory hood. Carefully remove it from the hinges by pulling it away from the windshield and set it aside.Set the new carbon fiber hood in place. It will be significantly lighter than the factory steel hood. Line up the bolts on the hinges and tighten them down. Reattach the gas shocks if applicable, or set the hood prop in place. Reattach your windshield washer jets if your hood permits, and run the lines on the underside. If you saved your light and want to reattach it, you can do so at this point. it can be attached using some 3M adhesive double sided tape, or you can carefully screw it in place, making sure to use screws small enough to not penetrate the top of the hood. Close the hood and check for alignment. If you need to adjust the alignment, lift the hood and loosen the hinge bolts slightly, just to where you can make small adjustments. Lower the hood and make any adjustments and re-tighten the bolts. This should complete your carbon fiber hood installation.If you need any support or advice for your carbon fiber hood installation, you can contact Majestic Modifications by emailing us at support@majesticmodifications.com. <a href="http://www.majesticmodifications.com">Majestic Modifications</a> is the complete car customization concept, specializing in air intakes and performace upgrades, body kits and <a href="http://www.carbon-fiber-hoods.blogspot.com">carbon fiber hoods</a>, glow gauges and interior accessories, wheels and tires, mobile video and elctronics.
Source: www.ArticlePros.com
